#Lath and plaster walls rennovation professional

Plaster walls were applied wet by a skilled plasterer using a hawk and trowel. Understanding these walls will help you navigate things as diverse as the differences in hanging things on a plaster wall versus drywall, repair and patching techniques, and even WIFI issues and potential resolutions! Anatomy of Plaster Walls Whether it frustrates or inspires you it’s worth understanding what a plaster wall is and what some of the pros and cons are of this historical wall covering. Plaster was used for centuries as a wall covering and it wasn’t until the mid-1940s that it began to be replaced in favor of newer and faster option, drywall. Depending on your situation they can be both beautiful and annoying. The bottom line: compare the price of a contractor’s bid to demolish plaster walls with what it costs to do it yourself and make your decision.Lath and plaster walls are a part of life in an old house.

Here’s good advice from Popular Mechanics: 7 Things to Beware of Before Smashing Through That Wall. If you’re working on a second floor room, consider jury-rigging a window chute using sheets of plywood to slide the debris outside to the dumpster. We’ve used a sledgehammer to break up the plaster and a prybar and bow rake to pull it off the lath. Use thick newspaper or cardboard and wrap the tape around the banister so it is shielded from any blows of plaster debris. Make sure you protect surrounding woodwork and trim like a hall banister. Protect the floor with a heavy tarp and tape plastic dropcloths at doorways to seal the room and keep the spread of plaster dust and dirt to a minimum. Protect yourself by wearing a hard hat, heavy gloves, boots, and a respirator mask. Remove woodwork and trim from any doors and windows, being careful if you plan to reuse them.

#Lath and plaster walls rennovation professional

If you have a vehicle that can haul the debris, you might be able to bring it yourself to a local landfill – but find out what the dumping fee is before you decide about doing it yourself.īefore you start tearing out a wall, confirm with a building professional that it’s non-bearing and determine the approximate location of plumbing and electrical lines so you avoid damaging them. And it’s a good idea to tell the neighbors and assure them it will be there on a temporary basis. The fee for the roll-off container includes delivery to your worksite and removal.īefore ordering one check with your local building department to see if a permit is required.

Think of yourself as a human wrecking ball and that’s pretty close to describing the job.Ī contractor will charge $411 to demolish a non-bearing 10-foot-wide by 8-feet-high (80 square feet) plaster wall, but you can do the work for $275, the cost of a dumpster, saving 33 percent for your effort. If you’re involved in a rehab job that requires knocking down a wall, consider doing some of the grunt work and save money by doing it yourself. doing it yourself for $275 and saving 33 percent.Īn old house renovation usually involves removing lath and plaster walls, and demolition can be a good, albeit messy job for a handy homeowner. How much does it cost to demolish a non-bearing lath and plaster wall? The contractor cost is $411 vs. The average price to Demolish Plaster Walls noted above is cost data to compare a contractor’s estimate with doing it yourself.